|
|
The Fuelless Engine! Self
Running! 3,000 watt output!
This is from a
phone conversation Rick Gibson had with Paul T. of LA
USA - June 28 2010 Monday
Hello Rick
I have successfully built your large Fuelless Engine
motor! It works great! It will run itself and a 3,000
watt windmill generator at the same time!
See our SP500 Generator. I am using two 12V DC
batteries. One to run the motor and the other to collect
the free energy from the second cycle of the motor. When
the first battery runs low to about 11.5V DC the
batteries are then switched. The first battery is then
recharged using the free energy from the motor. The
second battery, which is now fully charged, is used to
run the motor. This thing will keep on running and never
stop! I also have a 3,000 watt windmill generator
connected to the shaft of the motor to recharge a
battery bank. The battery bank powers my inverter to
power my home during blackouts. We get a lot of bad
weather down here, including hurricanes! I now want to
built a larger motor to power my entire house 24 hours a
day 7 days a week.
Paul T. State of
Louisiana
USA
______________________________________________________________________
The Fuelless Engine!
Hi David
I built the Fuelless Engine pancake motor and it is
running great! I am using a laser tach and I am getting
about 2700 rpm's. I will send you a picture. I have
started in total ignorance but the commitment remains.
You have been in my prayers.
Donald H. USA
______________________________________________________________
The Fuelless Heater!
Dear Dave
I just wanted to inform you, I am amazed by your
Fuelless Heater, Wow! It really works! I have been an
mechanic for about 10 years and when I saw how much heat
came from my small spaghetti can heater I was absolutely
AMAZED!! I am building a Hybrid car and will build a
bigger unit to heat it with. I am also going to build
your Fuelless Engine.
Sonny Schade USA
______________________________________________________________
Fuel From Water!
David Waggoner or Rick Gibson,
Last year in high school I set out to run my car on an alternative fuel. I
built an electrolyzer ( hydrogen fuel cell ) out of my own design and actually
started and idled a 302/5.OL carbureted engine from a 1971 Ford Mustang.
Notice:
You must be 18 years or older
to buy these plans.
Tyler Akins USA
______________________________________________________________
The Fuelless Engine Connected to a Car Alternator
Runs an Entire Home!
Phone Conversation from Jerry Salmons WV USA
9-6-2005
Jerry:
Hello, this is Jerry Salmons, I want to order your #362 Fuelless Engine plans,
I ran into a man who works at Home Depot and he told me about you guys, He said
he built ( 2 ) Fuelless Engine motors from your plans and is running his entire home
with
them. He said he is using the Fuelless Motors to run ( 2 ) high amp 12 volt
car alternators and
the car alternators are running and charging 12 volt car batteries or marine
batteries, The
batteries are then connected to a ( 2 ) inverters which
steps up the voltage
to 120V AC to run his entire home! he is running all his lighting,
appliances, TV and heating
etc.
Creative Science:
That is awesome Jerry! I have never heard of a
customer building ( 2 ) motors and running ( 2 ) alternators
with them. We designed our Fuelless Engine to run our SP500 Low rpm generator,
This is the most
high efficient way to do it. But if the alternators are working for this guy
then that is great! Alternators
are also very high efficient generators but they are not low rpm, we
designed our system to use a low
rpm generator to produce higher voltages and then we step down the voltages to
120V AC with high
amperage, using old or new high voltage microwave oven transformers.
It is much more efficient this
way and causes less stress on the motor.
_______________________________________________________________________________
CD
Package Deal # 1
Dear Creative Science &
Research
I have placed a
new order for the CD (all
33 plans and demo video on your website) which I would
like to download. If you
prefer FedEx Courier Shipping please advise. In case of courier shipment,
do not
declare a value of $300 otherwise I will be paying a huge amount of import tax.
I would prefer
DOWNLOADING it, despite the large file size. My internet connection is ADSL and
is suitable for large downloads.
Thank you for
the
fuelless
engine plans, which I downloaded.
All the best to
you,
Daniel Rueppel
South Africa
_____________________________________________________________________
Fuelless Heater!
I bought your CD Package #1, and have found it fascinating. I have built a
prototype of the Fuelless Heater and found that it works as advertised. I am
also working on the hydrogen electrolyzer. I am an aircraft mechanic an
Inspector. I built the heater in our hangar and found there to be a lot of
interest as onlookers passed by. It is not surprising after all; especially
here in Minnesota. So the obvious question is, what is the patent status,
and how can this technology be brought to more people? Especially the people who
can't build them themselves.
I am wondering if you get dozens of emails like this. I hope so. However, I
recognize the seriousness of patent infringement, liability issues,
free-energy technology opposition, etc. I want to be on the up and up with
you. I believe that through the underground, so-to-speak, much can be
accomplished. I understand the importance of staying away from the media on
something like this, And educating all participants in the realities of this
world, which I am fairly well versed in.
Thank you and I hope to hear from you soon.
All the Best.
Peter Delt MN USA
_______________________________________________________________________________
Homemade Batteries
Phone Conversation from James Vanhoese USA
8-30-2005
James:
I have a friend " Thomas " who purchased some plans from you, He
built 6 homemade
batteries from your #396 plans and is using them to light his entire home!
He removed
the light bulbs from his 120 Volt AC system and is using your batteries to
provide all
the lighting in there home. I think that's awesome! Now he is
coming over to my house
to teach me how to build my own batteries so I can have free energy lighting as
well!
Creative Science:
James that's great! Have your friend Thomas call or
write us so we can
talk. I have never heard of anyone using our battery plans to light there
entire home! Wow!
We only designed the plans to run small emergency lighting.
_______________________________________________________________________________
Homemade Solar Cells Jan
2010
Phone Conversation
Hey Rick
I wanted to let you know that I have successfully
screen printed my own solar cells. It took a little
while to learn to do it just right, but now I can make
as many solar cells as I like.
Thank You
Robert L. USA
______________________________________________________________
SP500 AC Generator
Oct 2009
David
I built your SP500 AC Generator and I am getting about
8,000 watts of power! WOW! I am using # 18 SWG
size magnet wire = 1.29mm. In USA about # 16 AWG
Thanks
Larry F. USA
______________________________________________________________________________
Dear Professor Waggoner
I read an article on the net a few years ago about water powered
engines in America, I was
a bit skeptical about it, but now I totally believe
it is true! Governments have been hiding the secrets of
science from people for
too long, especially Oil Companies. I applaud you for your work and for giving
back to the people, Science should be for everyone!
Michael Stone
3 Lansby court Riverton
6148
Australia
Tuesday March 23, 2004
_______________________________________________________________________________
Free Energy Science Is For Everyone!
Dear Professor Waggoner
I read an article on the net a few years ago about water powered
engines in America, I was
a bit skeptical about it, but now I totally believe
it is true! Governments have been hiding the secrets of
science from people for
too long, especially Oil Companies. I applaud you for your work and for giving
back to the people, Science should be for everyone!
Michael Stone
3 Lansby court Riverton
6148
Australia
Tuesday March 23, 2004
_______________________________________________________________________________
Lab Broken Into!
David, to answer your questions:
As you can see I email from work and
from home. Wayne is my boss at work and the email is set up in his
name but he is a cool redneck! I did not get a drawing for where
to place the coil or where to hook it up , but
I put it in parallel with the
two wires.
We are sending photos of ourselves in our lab
and as you can see I trust you to let you see what we look like!!!
I have been in this research for about 20 yrs I
have seen some of my friends threatened and run out of the research!
So I keep a very low profile needless to say , a friends lab was broke into
and everything taken and trash empted and
vacuumed and all prototypes and
materials gone like he never did any research at all!!! So I can relate to your
situation totally
that's why I deal with only a few (2) close friends only.
Thanks for the confidence in us and trust !!!!! We will keep you close to what we are doing
and the results we have
Thanks again David it's nice to know we are
not alone!!!!
Kevin Wallrose USA
________________________________________________________________________________
Fuelless Heater
Dear Sirs;
I have reviewed your Fuelless Heater plans- just a few questions, if you have
the time...
In your research, does the center rod need to be solid zinc or just zinc plated?
Can it
be a hollow pipe or does it need to be solid? And finally, can it be aluminum or
another
alloy? Thank You for the answers. I really enjoy your plans just reading them is
a pleasure
for my imagination.
Best Regards.
Kirk Patric
USA
______________________________________________________________
The Air Engine - Successfully Built!
Dear David Waggoner.
The plans downloaded and printed
great! Many thanks for the prompt service, You must have known it was
my birthday on Monday.
The Air Engine is up and running with no problems!
I am running a 2 stroke engine, using just the cylinder
piston and feeding the air through the plug hole, and it
works a great!
In case I blow myself up, MERRY CHRISTMAS.
Yours Sincerely,
George Elsom.
UK
______________________________________________________________
Fuelless Heater Plans July 31
2009
Hi Mr. Gibson
I purchased your Fuelless Heater plans a few years ago,
and this spring I decided that I had to do something
about it now. So since spring I have built a number of
them in the R&D program. I started up the water - floor
heater yesterday in the shop for drying lumber. Now the
cement floor is up to speed, the unit runs approximately
seven minutes, and is idle about 14 minutes. At our rate
of hydro, it costs about 19 cents to run and I am using
a 5 hp electric motor. It has no problem pushing the
heat up to 158F degrees and is still climbing. I've got
another Fuelless heater for the house trailer and want
to directly heat the air.
A special thanks in making these plans available and at
an affordable price.
Henry T. Manitoba
________________________________________________________________________________
Incredible Information!
David,
I have enjoyed reading the plans that I ordered. The
information is incredible!
Best wishes,
Mark Teller
USA
______________________________________________________________
Kids Science Fair project:
David
Thank you so much for helping the kids with this project.
( Plans # 396 Homemade batteries for their sons Science Fair project )
Jenny Pirc
USA
______________________________________________________________
5 Color Screen Printing Press
I built one of your 5 color T - shirt screen printing presses about 12 years
ago. And my wife has printed thousands of T-shirts since then. Good plans,
easy to follow. I thought I would pass this along to you.
Dave Tait CANADA
______________________________________________________________
Coil Winder ( Easy to build )
Photo sent in by a customer:
Ronan McDonagh
Ireland
Easy to build
coil winder using speed reducer from Grainger.com. But, this customer positioned his spool of copper wire wrong. Should be
standing on
it's end. it is much easier for the wire to come off the spool. Doing it
this way can break
the wire during winding, because the spool is so heavy and thin wire has to
pull it.
Copper coated wire can be purchased hundreds of places on the internet.
We provide
you the information on where to buy them in our plans.
_______________________________________________________________________________
The Fuelless Heater
Dear David Waggoner
Hi again, this is Peggy Schleicher. I am here in _______ visiting the folks and
have ordered the HV electromagnet and homemade battery plans.
I have built the Fuelless Heater and it works great! I am now getting
the
parts together to make the 1 hp Fuelless motor. Just to let you know the capacitor specialists were trying to sell the
$70.00ea computer grade 400v 470uf capacitors. I explained that the motor
parts cost was to be around $150.00, he then came up with the required
capacitors for $9.00 each.
Thanks again....Peggy
Peggy
Myra Schleic USA
Back To Top
Fuelless Engine
The SP500 Generator
|
|
